Suppose you are thinking of construction a bridge that will be used to convey vehicles and human traffic from one area to another. The most important priority for such a project is usually to make sure that the construction is safe. For this to happen, a number of things have to come together perfectly so that there is no weak link in the structure of the bridge. One of the most important of these is making sure that you use high quality fasteners such as the Monel 500 Hex nuts for the construction.
In order to do this, working with a high quality contractor so that they can advise you on the decisions you should make is always encouraged. Some of the information you can get from them includes:
How many of the fasteners you should get
It is important that you get the right amount of fasteners for bridge construction. When you get a smaller number than is necessary, you might have to compromise in as far as the quality of the fastening is concerned. For instance, you may have a lot of distance between each of the fasteners, and this in turn means that you may end up having a very weak structure. The other option you might have to deal with is buying too many of them. As you can imagine, this represents a waste of money, since you will have too many fastener left over.
By working with a skilled contractor, you will get a very accurate quote on how many of the fasteners you need. This is a figure that is usually arrived at after doing many studies of the structure, which means that the accuracy is very high.
The physical properties of the fasteners
In addition to that, you also need to note that in order to keep a bridge up, the fasteners usually need to have specific properties in order to bear the weight of the bridge. For instance, those that are used to connect supporting cables need to be very strong in order to resist the tension that is transmitted to them through the ropes. The only way to determine which qualities they need is by working with a high quality contractor who will go through this information with you so that they can then advise you.
Guidelines on how to buy them
If you are handling such a project for the first time, it might be difficult for you to determine simple issues such as where to buy the fasteners. When you work with a contractor who has a lot of experience, they can help you out with this. For instance, they can give you some advice regarding where to buy the Monel 400 carriage bolts you need for the project. This drastically reduces the amount of time wasted trying to get some information regarding where to get the fasteners.
In summary, it’s always a good idea to work with a professional who has been in the industry for long enough when deciding on which fasteners to get. This will help you avoid most of the pitfalls that many people go through when making such decisions.
Started my career in the fastener world in 1969 at, Parker Kalon Corp. a NJ based screw manufacturer located in Clifton, NJ working in inventory control, scheduling secondary production and concluding there in purchasing. In 1971 I accepted a sales position at Star Stainless Screw Co., Totowa, NJ working in inside sales and later as an outside salesman, having a successful career at Star I had the desire with a friend to start our own fastener distribution company in 1980 named: Divspec, Kenilworth, NJ. This was a successful adventure but ended in 1985 with me starting Melfast in August 1985 and have stayed competitive and successful to date. Melfast serves the OEM market with approximately 400 accounts nationally.