Skip to content
If you are interested in DIY projects or simply want to fix items in your house, one of the things you will definitely need to do is buy the right fasteners for the job. This is usually a very important issue, and getting it wrong has grave consequences. For instance, when you get the wrong […]

If you are interested in DIY projects or simply want to fix items in your house, one of the things you will definitely need to do is buy the right fasteners for the job. This is usually a very important issue, and getting it wrong has grave consequences. For instance, when you get the wrong kind of screw for joining different materials, you are likely to end up damaging the item you are trying to put together. In some instances, you may even end up causing damage to the screws or the equipment you are using to drive them into the materials. All this represents a loss in monetary terms, as well as a waste of a lot of time.
In order to avoid this, it’s usually a good idea to know which types of screws to use for the project you are interested in starting. Some of the commonest of these you are likely to run into include:


Wood screws
If you are interested in fastening wooden materials together, you will need to use wood screws if you are to get it done right. Many people often get other types of screws, and end up having a hard time with the joint.
Fortunately, identifying a screw meant to be used to fasten wood is not so hard. They are usually designed to have a coarser pitch, which means that their threads are wide apart. This is so as to ensure that they can grip to the wood more effectively, since this is softer than metal. In addition to that, the shank (the first few inches below the head) is normally unthreaded. This is not simply a design quirk; it’s meant to ensure that the screw ends up being flush with the surface of the wood once it’s in place. This means that one of the dangers of using a screw that has a threaded shank is that you will end up with protrusions from the surface of the wood. This is both aesthetically unpleasing and can also be dangerous as well.
Sheet metal screws
One of the defining characteristics of this type of screw is the fact that the threads go right up to the head of the screw. Most of them are designed in such a manner that they require a predrilled hole within the sheet metal in order to be put in place.
Drywall screws
These can either come in coarse thread or fine thread variety depending on the surface in which the drywall is to be mounted on. The coarse thread drywall screws are designed to be used to fasten the drywall onto a wooden surface, while the fine threaded ones are meant to be attached to metal studs. In addition to that, they are also distinguished by the fact that the junction between the head and the shaft is curved. This is to reduce the chances of having the drywall torn.
Common home renovation screws
These are just a few of the types of screws you are likely to use when doing DIY home renovation or some such other similar project. Knowing this information will make it easier for you to figure out which types of Phillip Pan Tek Screws to buy in case you ever need to.

About the Author

Larry Melone
By Larry Melone
President

Started my career in the fastener world in 1969 at, Parker Kalon Corp. a NJ based screw manufacturer located in Clifton, NJ working in inventory control, scheduling secondary production and concluding there in purchasing. In 1971 I accepted a sales position at Star Stainless Screw Co., Totowa, NJ working in inside sales and later as an outside salesman, having a successful career at Star I had the desire with a friend to start our own fastener distribution company in 1980 named: Divspec, Kenilworth, NJ. This was a successful adventure but ended in 1985 with me starting Melfast in August 1985 and have stayed competitive and successful to date. Melfast serves the OEM market with approximately 400 accounts nationally.

Related Posts

See All