Our blog

Choose a Category or Search Above

  • What Are Set Screws?

    When you are interested in using fasteners, you may come across some that you may not be very familiar with. Most of the time, these turn out to be highly specialized fasteners that are designed to perform a specific function, and which are usually sold by a limited number of high quality vendors. However, just because they are not very commonly used does not mean that you should not know anything about them.

    If you are in an industry where you use a large number of fasteners, it would be a good idea to know something about some of these rare fasteners, since you may find out that you actually need them to improve the quality of your products. One of such fasteners is the set screw.

  • How You Can Spot And Avoid Counterfeit Fasteners

    When you run a facility where you might need to use a large number of fasteners, one of the problems you might run into is how to make sure that the cost of getting such fasteners is reduced. There are many options you can try out, including working with different contractors to find out which one offers more value for money as well as negotiating with them and even buying online.

    However, in your quest to get low cost fasteners, you may end up being enticed by ones that are counterfeit. The market is currently flooded with a large number of counterfeit fasteners which are very cheap but which offer little to no quality at all. To ensure that you don’t waste money, you may need to acquire a few basic skills that you can use to identify the counterfeit ones. Some of these include:

  • How To Use Fasteners To Minimize Drag In Aircraft

    One of the goals of any aircraft design methods is to reduce the overall drag in aircraft as much as possible as that affects the plane. When a plane has too much drag, it tends to need more fuel to move at a specific speed. This has adverse effects on many aspects of flying it, including increasing the amount of fuel it needs to carry, limiting its top speed and even making it more expensive to fly. In addition to that, too much drag will also result in more environmental damage, something that many manufacturers are trying to avoid as much as possible.

    Making sure that a plane design has as little drag as possible should therefore be a main goal of any aircraft designer. To do this, however, one would need to understand the many things that cause drag, and then sort them out one by one. One of the most important of these is the way in which fasteners are used in the design. To ensure that drag is minimized, some of the tips one can use to reduce drag include:

  • How To Choose The Right Grade Of Stainless Steel Fasteners

    One of the challenges you are likely to face when you decide to do any kind of manufacturing is how to ensure that you use the right types of fasteners for the job. On the surface, this might not seem like such a big deal, but it will actually influence a lot including the quality of the products you make. Ensuring that you do as much as you can to end up with high quality fasteners that are ideal for the job will also influence how much it will cost to produce the goods you are manufacturing.

    One of the things you need to get right when choosing fasteners is the grade of the material. This is particularly important if you are working with steel fasteners. You should always remember that not all fasteners such as steel hex head cap screws or steel socket set screws will have the same properties; they are likely to differ in performance depending on the grade of steel used to make them. Some of the techniques you can use to ensure that you use the right grade of steel include:

  • Focusing On Fastener Use To Improve Door Security

    With issues such as insecurity cropping up in many parts of the world, making sure that your home is safe is becoming more and more critical. For you to have peace of mind regarding this, you will need to use a holistic approach rather than simply focusing on one aspect such as installing an alarm system in the home. The best way to approach it is usually to consult a company that provides security services, so that they can assess your home for any security gaps that you can then sort out.

    One of the things you will realize is that during such assessment, points of entry such as doors and windows will often be judged critically. This is because they are the obvious points of entry for anyone who wants to breach the home. In addition to obvious issues such as getting a home alarm, you may also need to bolster the security of the doors and windows as well. To ensure that your doors are safe, you will need to make sure that the fasteners used are not the weak point in the door. Some of the factors you should consider to facilitate this include:

  • Should You Clean Fasteners On A Regular Basis?

    If you are in the manufacturing industry, one of the challenges you might end up facing is how to ensure that the fasteners holding some of the machines together perform optimally. Usually, how well this goes will determine a lot, including how much it will cost you to maintain the said equipment as well as how frequently you will need to maintain them. If you are the decision maker in such a setting, the goal should be to try and ensure that you get minimal problems from your fasteners.

    There are several basic things you can do to achieve this. Some of these include making sure that the fasteners are put in place properly, and that they are checked on a regular basis. Making sure that they are made from the right material is also essential. For instance, if you want them to be light and strong, you can get titanium hex nuts or Monel 400 hex head cap screws. However, one other thing that most people neglect but which is actually very effective in maintenance of the fasteners is cleaning.

  • Fastener Information That A Quantity Surveyor Might Need

    When engaging in building construction, one of the professionals that you will definitely need to work with is a quantity surveyor. As their title might suggest, a quantity surveyor is an individual who attempts to figure out how much of each material needed to construct a building will be used. In addition to that, they also play a vital role in assessing each stage of the construction to make sure that the correct amount of material has been used at each stage. They are therefore important during the planning phase to help you figure out how much material to budget for, and during the construction phase to ensure that this budget is stuck to.

    For instance, it is a known fact that in order to do construction, you will need to use lots of fasteners to keep the different parts of the home together. The quantity surveyor will figure out the quantity of fasteners to be used during the entire project, and will also give you an idea of how much it will cost to use them. However, for this to work effectively, some of the fastener information you will need to supply to them includes:

  • Common Mistakes People Make When Purchasing Fasteners In Bulk

    There are many benefits associated with buying fasteners in bulk when you need them. Some of the most important of these include the fact that it can be much cheaper doing this compared to buying them in smaller batches, since you get to benefit from economies of scale when you buy in bulk. In addition to that, it also reduces the hassle of buying the fasteners. You only need to get them once, and forget about them for the duration of the project for which you need them.

    Despite all this, however, it’s important to also note that there are a number of mistakes that commonly occur when you buy the fasteners in bulk. Making sure that you address them will reduce the risk of spending a lot of money on the fasteners, only to find out that they are not exactly what you wanted in the first place. Some of the common mistakes include:

  • Auditing The Use Of Fasteners In Your Manufacturing Facility

    If you run a plant in the manufacturing industry, your main goal should be to maximize your profits. On the surface, this is a simple proposition. However, when you look at it more critically, you will realize that there are many things that affect the plant’s bottom line, and you need to pay attention to most if not all of them in order to maximize your profits. Making sure that even the little details are sorted out is very important and should never be neglected.

    A good example of this is how fasteners are used in the facility. If you are not keen on this, you may end up spending a lot of money on fasteners, and this will then eat up your profits. You will then need to raise the prices of your goods to maintain profits, which will reduce your competitive edge. For this reason, one of the key issues you should focus on is how to do auditing of your fastener use in the facility to ensure that they are used in the most effective manner possible. Some of the things you will need to do to achieve this include:

  • A Quick Guide To Electropolishing As A Corrosion Protection Method

    One of the major challenges for people who intend to use steel fasteners is how to ensure that they don’t end up being corroded. This is particularly important if the fasteners are likely to be used in environments such as close to large water bodies. There are many ways of tackling this, including through the use of electroplating and using fasteners made out of alloys rather than plain steel.

    One of the main forms of corrosion prevention one should consider using is electropolishing. In a nutshell, this is a form of treatment that is normally considered the opposite of electroplating. After the process is completed, there will be a thick layer of chromium oxide on the stainless steel. This oxide is usually resistant to corrosion, which means that the metal underneath will be protected from any chemical reaction that might oxidize it.

51-60 of 466