Distributor Fastener

Choose a Category or Search Above

  • Why High RPM Bolt Installation Is Not Always A Good Idea

    When you are installing any types of bolts and nuts, one of the issues that always tend to arise is how to do this fast. When you are doing this on a commercial scale, the tendency is to try and do it as fast as possible since time is normally of the essence in such cases. In order to achieve this, there are many people who consider using high RPM bolt installation techniques to ensure that they don’t spend too much time on individual fasteners. If you have automated the process, such as through the use of robots, you could also program them to install the fasteners at a faster rate than usual.

  • The Role Of Friction In Fastener Use

    In order to use fasteners properly, it’s usually important to understand the technical details that might affect the performance of each fastener. Once you gain an understanding of this, you will be in a better position to then alter the different parameters of your fastener installation process to ensure that you get the most perfect fit possible. One of the technical issues you need to address is that of friction. Friction is actually the most important element of fastener use, and it’s important to therefore always ensure that you get the most out of it when you put fasteners in place. Some of the roles it has to play include:

    • Ensuring that the fasteners stay in place: This is one of the most obvious roles of friction in fastener use. When there is enough friction between the fasteners and the material being fastened, the fasteners are more likely to stay in place for much longer.
    • Resistance to vibration: When a fastener is exposed to too much vibration, it has the tendency to become more loose on account of the increased microscopic movement. Having enough friction between the fasteners will reduce this effect. This means that when you are fastening an item that is likely to be exposed to too much vibration, you need to ensure that the friction between the fastener and the material is enough.

  • A Comparison Of Common Corrosion-Resistant Polymers For Bolt Design

    When you are in the market looking for fasteners such as Inconel socket head cap screws and nitronic 50 hex head cap screws, one of the challenges you might face is deciding which corrosion resistant polymers they should be coated in. This is an important decision to make, particularly if you are interested in ensuring that you get the most out of such bolts. In such cases, choosing the wrong polymer coating could result in a number of problems, including finding that the whole project is far too expensive. You may also not benefit from the full effects of the corrosion resistance if you get a polymer that is not suited to the application you want to put them in.

  • Concrete Column Fastening: What Are Your Fastener Options?

    Most people usually assume that when installing columns in a home, you don’t need to fasten them in place. However, this is not always the case. Many times, you will need to use fasteners such as steel hex head cap screws and titanium hex nuts to hold the column in place, in addition to using the concrete bracings you might use for it as well. One of the difficulties you are likely to face when in such a position is how to figure out which fastening options you should use. In all such cases, you need to consider various technical issues for your fastener options, including:

  • Factors To Consider When Choosing Fasteners For Car Park Design

    Designing a car park is something that often needs to be well thought out in order to be effective. One of the challenges that many people normally face when in this position is how to ensure that they end up with the highest level of quality for the least amount of money. Of course, there is a lot that you need to consider. One of the things that you are likely to overlook is the quality of the fasteners you use in the process. It might not seem important, but it’s critical that you always try to get the right fasteners for any car park construction job.

  • Thread Lubrication Options For Bolt And Nut Installation

    When doing bolt and nut installation, one of the concerns you will have to address is how to ensure that they actually fit properly and that they end up lasting long. One of the ways of doing this is by lubricating them. This is something that many people take for granted, but which often turns out to be extremely important in the long run. When you are going to use bolts and nuts in large numbers, it’s important that you try to keep this consideration in mind.

  • How Tight Should You Tighten A Screw?

    When using fasteners such as screws, there are many things that usually affect the performance of the joint. One of the most important technical issues is how tight the fastening has been done. In most cases, the degree of tightening will influence how well the fastener sits in place. In a world where competition in most industries is increasing, making sure that you always produce high quality products is important if you are to remain relevant.

  • Essential Tips On Fastening Thermoplastics

    Thermoplastics are an important component in many industries in this day and age. The fact that they are reasonably cheap and can be modified to suit many different applications means that they are used for manufacture of all kinds of things from electronics to food packaging. Chances are that you will need to use them for at least one application during the design and manufacture of your products.

    One of the issues you will need to handle is how to fasten them together. This is a critical point since it will determine many other things including how well the products you are manufacturing will last. Some of the issues you need to pay specific attention to when doing this include:

  • How To Use Fasteners In A More Eco-Friendly Way

    In most manufacturing industries today, the issue of environmental friendliness is one that has taken center stage. The fact that the environment is being quickly degraded due to the effects of industrialization means that more and more people are now focusing on ways of working while minimizing this effect. When you need to fasten any types of materials from consumer goods to civil works, you can also try to do your part in reducing the impact that the project has on the environment. There are a number of things you can do to use fasteners in a more eco-friendly manner. Some of the tips you could try out include:

  • How To Handle Fastener Use During Laptop Design

    Laptops are becoming some of the most ubiquitous electronics in the market, and there are many markets to be filled. If you are interested in the manufacture or assembly of laptops as a business, you have the potential to make quite a bit of money since the number of niches in the market is rapidly expanding.

    Of course, there are many factors that could influence the uptake of the types of laptops that you manufacture. One that most people take for granted is the fastener choice you make. It might not seem important, but the types of fasteners you choose to use will definitely have an impact on the eventual success of the products you sell. When making such decisions, some of the issues you need to take into account include:

81-90 of 302