Distributor Fastener

Choose a Category or Search Above

  • Common Mistakes To Avoid When Picking A Fastener Supplier

    When you decide to run a large scale manufacturing or assembly line, you will need to figure out how to procure the fasteners you need for the job. A common mistake for many first time business owners in such a position is thinking that since fasteners such as Inconel hex head cap screws and Nitronic 50 hex nuts are all the same, they can get them from pretty much any vendor they come across. However, it’s important to note that it’s easy to make many mistakes when you are picking such a vendor. Some of the most common ones include:

  • Are You Doing Fastener Storage The Right Way?

    When you run an industry where you have to assemble items, the issue of fastener storage is one that you are likely to not pay much attention to. However, the truth is that if you are not keen, you may end up having a few problems with the operation, mainly due to the fact that the fasteners may not have been stored properly. If you are going to use such fasteners in the long run, it is therefore imperative that you do all you can to store them properly.

  • Make International Fastener Purchases Easier With These Tips!

    There are many times when an individual or a business will find it necessary to make international fastener purchases. For instance, if you live in a country where the manufacturing industry for such products is not well developed, you may opt to get products from overseas if you are very interested in quality. You may also decide to import if you are interested in very specific fastener types, such as custom made ones. These are usually not commonly made, and only a handful of fastener vendors might stock them or produce them.

    For most people, going through the process of importing anything often turns out to be a hassle. However, you can get rid of most of the problems associated with the process by simply preparing yourself. When you want to import fasteners, some of the issues you need to take into account include:

  • Weight-Saving Tips For Using Fasteners

    It is common to find that people have different expectations when using fasteners for assembly. For instance, some scenarios might require that the fasteners be resistant to corrosion, in which case you will be required to use those that are made from a material that can’t be corroded. Another special scenario is when you want to minimize weight. There are many instances where one would like to keep the weight of a manufactured product as low as possible, such as when designing performance cars or even cell phones. In such cases, you will definitely need to think outside the box to save as much weight as possible. Some of the things one can do to achieve this include:

  • The Importance Of Optimizing Nut And Bolt Combinations

    When using nuts and bolts, one of the issues that most people don’t pay attention to is the type of combination used for both. This is something that you should avoid, particularly if you are using the fasteners in large scale. Using the wrong combination of nuts and bolts in large scale has the potential to cause many problems including increased financial costs. In a few cases, the problem could be so severe that it results in structural instability of the items you are putting together, which means that you could end up with structural failure. To this end, you should always take the issue of such nut and bolt combinations seriously.

  • Harnessing Wind Energy: Why Bolt Selection Is Paramount

    Wind energy is fast becoming one of the most popular forms of energy in many parts of the world. In fact, in some countries, it has become the number one source of power for the populations. The fact that wind is one of the cleanest sources of energy means that in the foreseeable future, one can expect even more countries to consider setting up wind farms for power production.

    One of the critical forms of infrastructure that is needed for doing this is the fasteners which include nuts and bolts for example. It’s important that high quality fasteners are chosen for such a project, since they will determine a lot including:

  • How To Sort Out Fastener Misalignment Problems

    When using fasteners, one of the common problems people tend to face is having them being put in place out of alignment. This is an issue that should always be sorted out well since it will determine the quality that you end up getting with the installation. For instance, if you are in the process of assembling precision equipment, not being in a position to ensure that the fasteners will be properly aligned could end up costing you. In addition to increasing the cost of the project, you may also end up having to deal with other issues such as a poor brand reputation.

    In order to avoid this, you should always ensure that you put the fasteners in place in such a manner that they will not end up being misaligned. Fortunately, this is not very difficult to do. When using fastener types such as Inconel hex tap bolts and nitronic 50 hex lag bolts, there are a number of things you can do to ensure that you never have to deal with fastener misalignment problems. Some of these include:

  • Common Causes Of Screw Lubrication Failure

    When using fasteners of any kind, it’s normally advisable to ensure that you lubricate them before use. There are many benefits associated with this. Not only are they more likely to last long, but will also be much easier to use. The fact that many people don’t take lubrication seriously when installing fasteners such as Inconel hex nuts or steel socket head cap screws is therefore one that needs to be avoided.

    One of the issues you will need to address when using screw lubrication is the quality you will end up getting. As much as possible, you should do everything you can to ensure that the lubrication will work to your advantage. This usually means first understanding the things that lead to lubrication failure, and then trying to avoid them as much as possible. Some of these include:

  • The Benefits Of Nylon Patching Your Lock Nuts

    If you frequently use fasteners such as nitronic 50 socket head cap screws or Inconel hex head cap screws, one of the problems you might have is how to ensure that they end up lasting as long as possible. This is especially important if you are going to fasten something permanently. In such cases, you ought to be keen to ensure that you never have to spend too much time or money in future trying to fasten the loosened nuts and bolts.

    There are many strategies that have been adopted to help you do this. One of these is through the use of nylon patching. As the name seems to suggest, nylon patching is a process where the threads of the bolts or nuts are covered in nylon material before being fastened.

  • Nails Vs. Screws: Which Are Best For Metal Roofs?

    Whenever you are doing any type of home construction, one of the issues you will always need to address is which type of fastener to use.  It is always critical that you use the right type of fasteners for any job since this will determine many things from how safe the house will be to how expensive it will be to construct. A good example of this is when you are putting up a metal roof on your house. In such cases, it’s critical that you make the right decisions regarding this, since it will determine how safe it will be. You may come to a point where you need to make a decision about whether to use nails or screws for construction of a metal roof.

71-80 of 302