Distributor Fastener

Choose a Category or Search Above

  • Most Commonly Used Nut Styles

    When you need to use fasteners such as Inconel hex nuts and nitronic 50 flat washers, the last thing you should get wrong is the type of fastener you end up getting. Many people end up making a mistake when it comes to this simply because they do not correlate the products they are buying to the task they want to use them for. It is very important for you to first figure out the application for which you will be using the fasteners, and then getting a fastener type that will suit it and not the other way round.

    When you go shopping for fasteners such as bolts and nuts, you will always find that there are many different types available for your needs. When you have in mind the types of applications you want to use them for, it becomes much easier for you to identify the one that will suit you the most. When it comes to nuts, for example, some of the commonly used styles you will come across include:

  • The Advantages Of Plating Fasteners

    When ordering fasteners, it is important to get all the details right. When you consult a high quality vendor, you will find that they will not simply sell the screws or bolts you need without asking any questions. Most of them will want more detail rather than the basics such as the size of the fasteners. This is because there are many aspects that can be changed depending on how you are going to use them. Making sure that you optimize this will increase the chances of getting good value for money.

  • How To Choose Between Fully And Partially Threaded Bolts

    At some point in time when you are thinking of using fasteners such as aluminum  hex head cap screws or steel hex nuts and bolts, you will be confronted with the decision on which type you should pick. Typically, most people end up finding this a difficult thing to do particularly if they have not considered the vast range of options available to them or the exact reasons why they are getting the fasteners in the first place. However, if you are clear about these, it will be very easy for you to avoid being confused by the variety.

    Some decisions might initially seem simple, but may need technical expertise. One of these is whether you should get partially threaded or fully threaded bolts. It is not advisable for you to simply choose to use one or the other, but to first address the reasons why you are getting the fasteners in the first place.

  • Fastener Corrosion: Why It's Not All About Rusting

    When you are planning on buying or using fasteners, one of the concerns you might have is corrosion. When your fasteners end up being corroded, they often become difficult to remove, and may even damage the item that you had been fastening in the first place. This means that before you even order them, it would be wise to put in place measures that will ensure that you never have to deal with these problems. Some of the common ones include using a fastener material that does not corrode, or having the fasteners plated. You can also have them painted using special materials that will reduce corrosion.

    One of the things you need to keep in mind when doing all this is that corrosion is not only limited to rusting. Though rusting is the most common form of corrosion, there are many other types that can have similar effects, and which you need to keep in mind as well. Taking them for granted has the same effect as letting rust damage your fasteners. Some of the other types of corrosion include:

  • 3 Things About Stainless Steel Fasteners You Probably Don’t Know

    When you need to buy stainless steel fasteners, it’s usually a good idea to know as much as you can about them. This is important since it makes it easier for you to understand what you can expect out of them. There are many people who use heresy as a basis for deciding on which fasteners to use, as well as how to use them. However, this can result in the loss of a lot of money as well as customer goodwill particularly if you intend to use the fasteners in the long term.

    In the case of stainless steel fasteners, there are a number of facts that you may ignore but which you should probably account for when you decide to use them. Some of the most important of these include:

  • Why You Should Adopt A Vendor Managed Inventory For Your Fasteners

    If you run a project where you intend to use a large number of fasteners such as aluminum hex head cap screws and nylon socket head cap screws on a regular basis, it’s usually imperative that you come up with a planned system for managing their use. Otherwise, you will end up with problems including high expenses on account of fastener misuse. You may also note some problems with supply of the fasteners, such as when you order much fewer quantities than you should have.

  • The Most Common Fastener Coatings

    In order to get the most out of any fasteners, it is usually necessary to make sure that every aspect of the fastener is suited to the application you are going to use it for. For instance, if you are going to use stainless steel hex head cap screws for bridge construction, it would be important to make sure that the size and configuration of the screws are suited to holding up the weight of the bridge together with the vehicles or people who will be using it. In order to do this properly, a knowledge of the various things that affect the performance of the fasteners is critical.

  • What Threadlock Adhesives Are And How You Should Use Them

    When you are shopping for fasteners, there are many terms that you will come across, and some of them may sound confusing. It’s important to always be sure of what they mean so that you can make the best decision regarding which one to get. There are many times where people ignore this, and then end up buying fasteners that get damaged much sooner than they had expected. The flipside is that you may end up spending a lot more on fasteners that have qualities that you don’t need in your project, thus increasing the cost of the project.

    One of the terms you will come across is threadlock adhesive. There are some vendors who will sell you fasteners that have threadlock adhesives, and others who will modify the fasteners using such adhesives after you buy them. There are many applications for which products such as aluminum socket set screws and nitronic 50 socket head cap screws will benefit from threadlock adhesives.

  • How To Install Paintings On Walls

    When you decide to move house, one of the challenges you may face is how to fasten paintings on walls. This also happens to be the case if you opt to spruce up your home using paintings or other similar art items. There are many things that you need to keep in mind when doing the fastening, which is why many people who try it out end up not doing it well. Some of the factors you need to keep in mind when doing this include:

  • The Environmental Challenges Of Using Stainless Steel Fasteners

    When most people go out to buy fasteners, they usually get stainless steel hex head cap screws, stainless steel hex nuts and many other fasteners made out of this metal. One of the issues that most people have to contend with is the environmental impact of using stainless steel fasteners. This is mainly due to the fact that many people are now more conscious of the environment, and for this reason will try to do as much as they can to reduce their effect on it. The use of stainless steel products such as fasteners can have a negative influence on the environment, particularly if you don’t pay attention to how you go about acquiring and using them.

11-20 of 302