Distributor Fastener

Choose a Category or Search Above

  • The Advantages Of Bolts And Nuts Over Welds

    hex head bolt      welding

    Bolts And Nuts Vs. Welds

    If you are designing heavy industrial infrastructure such as buildings and railroads, should you weld or bolt them in place?

    On the surface, this might not seem like such a major decision to make, and there are many people who often choose their fastening methods in an arbitrary manner.

    However, the truth of the matter is that there are many differences between the two methods of fastening, and you need to be careful about which one you end up picking. This is mainly due to the fact that there are certain times when using fasteners, such as Inconel hex lag bolts and nitronic 60 hex tap bolts, makes more sense than welding.

    Consistent Bonds With Fasteners

    Find the hardware solutions you're looking for here.

    In some instances, it’s critical that the bonds you create during a manufacturing process be as consistent as possible. If, for instance, it turns out that there are some parts of a train track where the bonds are not as strong as in other areas, this could turn out to be the weak spot that results in damage to the entire track. As a result, you will have to spend a lot more time fixing this part of the track compared to the rest.

    This is an issue that is usually very easy to solve when you use regular fasteners such as bolts and nuts. As long as you make sure that they are installed using the same torque and at an equal distance from each other, you can be assured that the weight will be distributed evenly among them.

    Easier Inspection

    When doing any major infrastructure installation such as construction of a bridge or a railway, you have to pay attention to the ease with which the tracks can be inspected. When you have a weld in place, it’s usually more difficult to do a visual inspection. You will often need to employ the use of more sophisticated equipment such as an x-ray machine to find out if there are cracks in the welds. This is not only cumbersome to use, but can also turn out to be a bit more expensive than you had bargained for.

    Easier Replacement Of Parts

    One of the most significant problems with using welds to put infrastructure together is the fact that it will make the whole installation more or less permanent. This means that if a section of the installation needs any replacement, you would need to take down the entire structure in order to do so. Using other means of repair can be very expensive.

    However, when you do a modular installation and use bolts and nuts to fasten each module, you would only need to identify the one that has the problem, undo the fasteners, and replace it. In addition to being cheaper, this is also a much faster way of doing maintenance.

    If you're in charge of designing such a facility, you should always give thought to the types of fasteners you would use. It will determine a lot regarding the future use of the structure.

  • Ways Of Monitoring Fastener Use In Your Manufacturing Plant

    manufacturing plant fastener usage

    When you intend to use a large number of fasteners such as aluminum hex tap bolts and Monel 500 hex lag bolts, you will definitely be interested in ways of making sure that they are used prudently. Most people try to micromanage in order to achieve this.

    This is usually done by physically inspecting how each employee uses the fasteners, and then querying the ones who don’t use them in an expected pattern. However, using this method to audit the use of fasteners is not only time consuming, but it also creates a feeling of mistrust in your staff members.

  • Why Fastening Carbon Fiber Is Such A Tricky Process

    If you are involved in the automotive industry, one of the things that you will have noticed is the increased interest in the use of carbon fiber in the manufacture of cars. This is a particularly expensive compound, though increasing technology means that in the near future, it will be available more widely.

    fastening carbon fiber panels

    One of the challenges that you are likely to face when using carbon fiber or other composite materials is that they do not respond to pressure in the same way that other materials such as metals do. This is mainly because they have a very different structure. For instance, if you used regular aluminum carriage bolts or monel 400 hex head cap screws to fasten the composite materials, it might turn out to be more difficult than you think. Some of the difficulties associated with using composite materials include:

  • The Types Of Stainless Steel That Fasteners Can Be Made Out Of

    stainless steel

    In this day and age, one of the commonest materials from which fasteners are made is stainless steel. 316 stainless steel carriage bolts and grade 8 steel hex lag bolts are extremely ubiquitous these days. However, most people who use them are usually not familiar with the characteristics of stainless steel as a material used to build fasteners. It’s important for you to gain even a basic understanding of how this material works, so that you can then figure out how to take advantage of it in any setting. It’s also a good idea to know of the different types of stainless steel that are available, and what their applications are.

  • Common Metals Used To Make Stainless Steel Alloys During Fastener Manufacturing

    alloy fasteners

    When you choose to buy fasteners such as Inconel carriage bolts and titanium hex tap bolts, it’s normally very easy to take for granted the fact that such fasteners are usually built with a lot of research in mind. This is why it’s always a good idea to buy them from a high quality contractor, so that you can benefit from the knowledge that they have on the fasteners.

  • Simple Tricks To Reduce Fastener Wastage In A Manufacturing Plant

    reduce fastener wastage

    In the manufacturing industry, one of the things you have to keep an eye on is reducing the costs of doing any manufacturing. This often increases the competitiveness of the facility, and is therefore something that is definitely worth pursuing.

    Unfortunately, there are many issues that usually need to be sorted out when doing this, one of which is making sure that you minimize the loss attributable to fastener loss and damage. Remember that though fasteners such as Inconel center lock nuts and alloy 20 hex tap bolts might seem like minor parts of the manufacturing process, they can actually result in a major loss if they are not used properly.

  • Why You Should Consider Plastic Fasteners For Marine Use

    When thinking of using fasteners in a marine setting, most people will opt for traditional fasteners such as Grade 5 steel carriage bolts or nitronic 50 hex lag bolts. This is because most of these are easily available, and have been the traditional marine-use fasteners for a long time. However, if you are thinking of getting more out of your boat, you might consider having it fastened using newer materials such as new age nylon.

    maine industry plastic fasteners

    Using plastic fasteners to join boat panels and parts might at first seem odd. The main problem that most people face is that plastic seems too soft to keep all the boat parts together. However, the truth is that numerous advances have been made in the manufacture of plastic fasteners, which makes them more reliable these days. Some of the reasons why you should definitely think about them for marine use include:

  • The Differences Between Self-Drilling And Self-Tapping Screws

    Self Drilling Screws

    Aluminum hex head cap screws and nylon Phillips screws are some of the most commonly used fasteners types in the world today. However, you would be surprised to find that there are many people who don’t know how to use them properly. One of the consequences of this is that you may end up spending money on screws that will end up not working well for you. This might not be very significant if you are using them for only minor fastening, but if you are using them on a larger scale then it’s something that you should definitely worry about.

  • How To Use Fasteners To Join Carbon Fiber Panels

    fasteners for carbon fiber panels

    With advancements made in technology, the use of composite materials such as carbon fiber is becoming increasingly popular. In most industries including in the automotive world, the use of carbon fiber and other similar materials is becoming more prevalent. This is owing to the fact that the materials are not only tougher but also much lighter as well. In many cases, it also turns out that they are more environmentally friendly compared to traditional materials such as metal and plastic.

  • When Is The Best Time To Opt For Self-Locking Fasteners?

    self locking fasteners when to use

    When you are shopping around for fasteners, one of the types that you are likely to run into are the self-locking ones. These can be variants of the normal types of fasteners such as the Monel 500 carriage bolts or the Hastelloy C276 hex tap bolts. However, they have the distinctive characteristic of being self-locking, which means that they can’t be used for just any application. There are a number of scenarios where the use of such fasteners is particularly effective, as they offer superior performance compared to other types of fasteners. Examples of these scenarios include:

111-120 of 302