Stainless Cap Screws

Choose a Category or Search Above

  • Mistakes You Should Avoid When Using Stainless Steel Fasteners

    The use of stainless steel fasteners is quite popular because of their excellent corrosion-resistant and recyclable properties. They offer resistance against any level of usage severity and have great load-bearing characteristics in both hot and cold weather. However, if these fasteners are not handled properly; it may bring damage to the entire setup. Here are few mistakes you certainly cannot afford to make when using stainless steel fasteners.

  • How You Can Save Money On Aircraft Nuts And Bolts

    There are various kinds of fasteners available for application in numerous industries and they differ in dimension, durability, robustness, pull-out strength, shear-capacity, corrosion-resistance and many other factors that go into manufacturing a certain type of fastener for particular equipment. Speaking of which, the aviation industry utilizes parts that meet the safety standards recommended by the relevant body, and in order to fit those parts firmly to tolerate a huge amount of stress, the fasteners such as aircraft nuts and bolts play the vital role.

  • Good Habits That Will Make Stainless Steel Fasteners Last Longer

    Stainless steel fasteners may be an economically apt option that offer outstanding anti-corrosion properties, but that doesn’t mean they are not going to corrode or cost you anything extra in the long run.  Improper habits employed by casual operators can sometimes break down a properly-maintained framework. You need to educate the employees with good habits that preserve long-lasting characteristics of the stainless steel fasteners.

  • Fastener Recycling Options You Can Explore

    An astonishing amount of metallic waste is created by the industries in the form of fasteners. The household wastes also do not help the cause. It’s our prime responsibility to exert a positive impact on the environment by reusing and recycling anything that poses threat, let alone be the fasteners. Landfill disposal is not the ideal solution for toxic materials, and there’s a need to have proper fastener recycling practices in action; some of which are listed below.

  • Avoid Overdriving Your Fasteners To Maintain Shear Capacity

    The technology behind driving the fasteners into their slots has drastically improved right from the age of screw drivers to cordless drills. In today’s modern era, automatic machines have made it easier to carry out fastening operations without dealing with much disorientation. However, driving the screws into their holes with millimeter precision requires practice and skill of the operator. Overdriving the fasteners can reduce the pull-out strength and shear capacity by 5-22%, depending upon the extent to which the nail is overdriven.

  • What is Galvanic Corrosion?

    The scientific definition of galvanic corrosion describes it as an electrochemical process in which two different metals or alloys come in electrical contact with each other in the presence of an electrolyte under the conditions of a corrosive environment, which leads to relative corrosion of both the materials in contact.

    Rusting of iron is the most common example of galvanic corrosion, in which the core steel of the iron sheet is attacked and the protective coating of zinc is destroyed.  Zinc being less noble is susceptible to the galvanic attack and once fully exterminated; it can cause the base metal to corrode very quickly. On the other hand, tin being more noble than the core steel makes it harder to break, but when it does, the underlying steel suffers the worst.

  • Do You Need Fasteners For Mounting Solar Panels?

    Solar panels absorb the sun’s rays and use them to create a source of energy which leads to generation of heat and electricity. These can either be installed on the roof or in an open ground which receives direct sunlight. The most vital thing is the tilt of the panel, so that the surface can be exposed to maximum rays.

    Depending upon the configuration of mounting a solar panel, there are different types of fasteners required to firmly hold the structure in order to resist any structural bend under extreme conditions. Reliability and stability of the mounting fasteners cannot be comprised, especially when the setup in question is a solar panel.

  • The Use Of Anti-Seize Technology When Using Screws

    The correct use and longevity of any fastener often depends on many factors. One of the most important of these is the quality of the anti-seize technology used in putting them in place. It is common to find that most people don’t even know that anti seize compounds are needed during fastening, but you will definitely need it when putting in place aluminum socket screws or Inconel socket head cap screws in place if you want to have an easy time with them.

  • Most Commonly Used Nut Styles

    When you need to use fasteners such as Inconel hex nuts and nitronic 50 flat washers, the last thing you should get wrong is the type of fastener you end up getting. Many people end up making a mistake when it comes to this simply because they do not correlate the products they are buying to the task they want to use them for. It is very important for you to first figure out the application for which you will be using the fasteners, and then getting a fastener type that will suit it and not the other way round.

    When you go shopping for fasteners such as bolts and nuts, you will always find that there are many different types available for your needs. When you have in mind the types of applications you want to use them for, it becomes much easier for you to identify the one that will suit you the most. When it comes to nuts, for example, some of the commonly used styles you will come across include:

  • The Advantages Of Plating Fasteners

    When ordering fasteners, it is important to get all the details right. When you consult a high quality vendor, you will find that they will not simply sell the screws or bolts you need without asking any questions. Most of them will want more detail rather than the basics such as the size of the fasteners. This is because there are many aspects that can be changed depending on how you are going to use them. Making sure that you optimize this will increase the chances of getting good value for money.

1-10 of 105

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 11