Marine Fasteners

Choose a Category or Search Above

  • Mistakes You Should Avoid When Using Stainless Steel Fasteners

    The use of stainless steel fasteners is quite popular because of their excellent corrosion-resistant and recyclable properties. They offer resistance against any level of usage severity and have great load-bearing characteristics in both hot and cold weather. However, if these fasteners are not handled properly; it may bring damage to the entire setup. Here are few mistakes you certainly cannot afford to make when using stainless steel fasteners.

  • 3 Things About Stainless Steel Fasteners You Probably Don’t Know

    When you need to buy stainless steel fasteners, it’s usually a good idea to know as much as you can about them. This is important since it makes it easier for you to understand what you can expect out of them. There are many people who use heresy as a basis for deciding on which fasteners to use, as well as how to use them. However, this can result in the loss of a lot of money as well as customer goodwill particularly if you intend to use the fasteners in the long term.

    In the case of stainless steel fasteners, there are a number of facts that you may ignore but which you should probably account for when you decide to use them. Some of the most important of these include:

  • The Importance Of Proper Riveting In Ship Restoration

    The restoration of old ships is a fun process, though it can also be arduous at times. If you find yourself in a position where you need to restore one, it would be wise to ensure that you plan on how you will go about it. This is particularly so if you want to ensure that the finished product will have the same characteristics and looks as it would have in its heyday.

    To do this, you may need to use the ship building technologies that were used at the time the ship was manufactured, rather than the ones used today. For instance, in a place where you would use titanium hex head cap screws today, ship builders of old may have used an entirely different fastener. It’s important that you acquaint yourself with such issues before proceeding with the restoration.

  • Qualities Of Titanium That Make It An Excellent Fastener Material

    Titanium

    When you are out there shopping for fasteners, one of the things that you will have to deal with is how to figure out which material to get them in. These days, titanium carriage bolts and titanium hex lag bolts are the in thing in many industries. The reason for this is that since its development, titanium has turned out to be one of the most reliable metals for fastener use in many industries. Most people know of titanium owing to the fact that it’s very expensive, and this is why it’s not so common. However, there are many scenarios where using it makes a lot of sense. Some of the reasons that make it particularly appealing include:

  • Why You Should Consider Plastic Fasteners For Marine Use

    When thinking of using fasteners in a marine setting, most people will opt for traditional fasteners such as Grade 5 steel carriage bolts or nitronic 50 hex lag bolts. This is because most of these are easily available, and have been the traditional marine-use fasteners for a long time. However, if you are thinking of getting more out of your boat, you might consider having it fastened using newer materials such as new age nylon.

    maine industry plastic fasteners

    Using plastic fasteners to join boat panels and parts might at first seem odd. The main problem that most people face is that plastic seems too soft to keep all the boat parts together. However, the truth is that numerous advances have been made in the manufacture of plastic fasteners, which makes them more reliable these days. Some of the reasons why you should definitely think about them for marine use include:

  • Tests That Need To Be Carried Out On Marine Equipment Fasteners

    fastener testing for marine equipment

    There are some manufacturers who usually need to design marine equipment, such as exploratory vehicles. In such cases, attention has to be paid to the conditions that the craft will be exposed to, so as to ensure that the design is not compromised. When doing this, one of the important decisions one would need to make is which type of fasteners to use for the project. Even if the rest of the design is perfect, using the wrong fasteners can result in poor performance of the craft.

  • How Galvanic Corrosion Occurs And How You Can Protect Your Fasteners From It

    If you run an industry where you have to use a large number of fasteners for any reason, it’s always important to pay attention to how you use them to reduce the chances of complications. Whether you are making products for industrial or retail use, a high incidence of fastener failure is something that can eventually erode the trust that clients have in your products. In the end, you might end up losing all your business.

    One of the specific issues you need to address is how to ensure that the fasteners you use will not corrode over time. There are many ways in which this can happen, but one of the most commonly seen is galvanic corrosion. This typically occurs when you use fasteners such as 316 stainless steel hex nuts without preparing them first.

  • Factors That Should Guide Fastener Selection When Constructing An Oil Rig

    Every so often, an individual will need to construct a structure in an aquatic environment. A good example of this is the construction of an offshore oil rig that is used to drill for oil from the sea bed. When undertaking such a construction project, simply putting the rig together and hoping for the best is not a good way to approach it. It’s wise to consider everything that will affect the oil rig, and then make sure that the construction is done in such a manner that all these things will be kept in mind. This is especially so when you are trying to make decisions regarding the types of fasteners you will use for the project. Some of these include:

  • Common Types Of Fasteners Used In Boating Equipment

    boating equipment and fasteners

    An increasing number of people these days own boats or are thinking of investing in them. If you are or are aspiring to be a boat owner, one of the things you will need to do is have it maintained on a regular basis. Decisions such as what types of fasteners to use at such times is important. It determines both the longevity of the boat as well as its depreciation. Using inappropriate fasteners is likely to result in a faster depreciation and higher maintenance cost of the boat.

    In the past, nails and wood screws were adequate for the construction or maintenance of boats since most of them were made out of wood. Today, most boats are made of fiberglass and other advanced materials. Using nails and wood screws on them will only lead to an increased risk of leakages. The main types of fasteners one can use for boats and yachts these days include:

  • Is Your Marine Equipment Constructed In The Best Way Possible?

    The construction of marine equipment is usually thought of as a complicated technical process. However, the key to getting it right is making sure that you plan for the building process thoroughly. The types of materials you use for the project as well as how you choose to fasten them are issues that you should pay particular attention to, since they have a huge bearing in determining the overall success of the project.

    marine equipmenet construction

    When building devices such as mini submarines and machines that will be used at depths, there are a few principles you should ideally follow when doing such construction to reduce the risk of not doing it right. Some of these include:

1-10 of 48

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5