manufacturing

Choose a Category or Search Above

  • Understanding The Use Of Fasteners On 3D Printed Parts

    A 3D printed design for a large configuration requires proper fastening of the smaller components forming an assembled structure that is basically used as a hardware prototype.  There are a few different ways of fastening the pieces and it’s important to understand the use of suitable fasteners on 3D printed parts.

  • How You Can Save Money On Aircraft Nuts And Bolts

    There are various kinds of fasteners available for application in numerous industries and they differ in dimension, durability, robustness, pull-out strength, shear-capacity, corrosion-resistance and many other factors that go into manufacturing a certain type of fastener for particular equipment. Speaking of which, the aviation industry utilizes parts that meet the safety standards recommended by the relevant body, and in order to fit those parts firmly to tolerate a huge amount of stress, the fasteners such as aircraft nuts and bolts play the vital role.

  • Are You Constantly Experiencing Loose Screws?

    Repair services are less called for, if maintenance of any sort of equipment is done on a routine basis with a simply outlined procedural approach that keeps a check on small things such as loosening of screws and other fasteners that hold the structure firmly. Not only does it save cost on future repairs, but also ensure there is no long term damage taking place. So if you have been frequently experiencing loose screws in the recent past, you should know the actual reasons behind it!

  • Tips On Heat Treating Fasteners

    The heat treatment process employs cooling and heating operations applied on alloys or metals in the solid state of matter. Fasteners are subjected to application of heat in order to achieve desired alteration in rigidity, smoothness, malleability and material strength.  The microstructure of the metal parts is altered by the process of annealing to ease off the manufacturing operation.

    In this process, the three most common types of furnaces used are: rotary, batch and continuous mesh-belt. Such an operation involves huge investment of energy and cost. Hence, it’s sensible to keep a few points in mind when heat treating fasteners.

  • The Environmental Challenges Of Using Stainless Steel Fasteners

    When most people go out to buy fasteners, they usually get stainless steel hex head cap screws, stainless steel hex nuts and many other fasteners made out of this metal. One of the issues that most people have to contend with is the environmental impact of using stainless steel fasteners. This is mainly due to the fact that many people are now more conscious of the environment, and for this reason will try to do as much as they can to reduce their effect on it. The use of stainless steel products such as fasteners can have a negative influence on the environment, particularly if you don’t pay attention to how you go about acquiring and using them.

  • Magnesium Fasteners: Benefits And Common Uses

    Magnesium is one of the most coveted items for use in various applications, one of which is the design of fasteners. You will find that magnesium hex head cap screws and magnesium socket set screws tend to have qualities that make them ideal for many uses. However, the fact that the metal is usually a bit more expensive than steel or aluminum means that it cannot be used as a substitute for either. Rather, it should be used in situations where the qualities of magnesium are needed, and where these other metals may not last long or provide the benefits that one would be looking for.

    In order to make the correct decision regarding this, one would need to understand the benefits of magnesium. This makes it easy to identify the scenarios where using it would be a good idea. Some of these include:

  • How To Choose The Right Grade Of Stainless Steel Fasteners

    One of the challenges you are likely to face when you decide to do any kind of manufacturing is how to ensure that you use the right types of fasteners for the job. On the surface, this might not seem like such a big deal, but it will actually influence a lot including the quality of the products you make. Ensuring that you do as much as you can to end up with high quality fasteners that are ideal for the job will also influence how much it will cost to produce the goods you are manufacturing.

    One of the things you need to get right when choosing fasteners is the grade of the material. This is particularly important if you are working with steel fasteners. You should always remember that not all fasteners such as steel hex head cap screws or steel socket set screws will have the same properties; they are likely to differ in performance depending on the grade of steel used to make them. Some of the techniques you can use to ensure that you use the right grade of steel include:

  • Should You Clean Fasteners On A Regular Basis?

    If you are in the manufacturing industry, one of the challenges you might end up facing is how to ensure that the fasteners holding some of the machines together perform optimally. Usually, how well this goes will determine a lot, including how much it will cost you to maintain the said equipment as well as how frequently you will need to maintain them. If you are the decision maker in such a setting, the goal should be to try and ensure that you get minimal problems from your fasteners.

    There are several basic things you can do to achieve this. Some of these include making sure that the fasteners are put in place properly, and that they are checked on a regular basis. Making sure that they are made from the right material is also essential. For instance, if you want them to be light and strong, you can get titanium hex nuts or Monel 400 hex head cap screws. However, one other thing that most people neglect but which is actually very effective in maintenance of the fasteners is cleaning.

  • Auditing The Use Of Fasteners In Your Manufacturing Facility

    If you run a plant in the manufacturing industry, your main goal should be to maximize your profits. On the surface, this is a simple proposition. However, when you look at it more critically, you will realize that there are many things that affect the plant’s bottom line, and you need to pay attention to most if not all of them in order to maximize your profits. Making sure that even the little details are sorted out is very important and should never be neglected.

    A good example of this is how fasteners are used in the facility. If you are not keen on this, you may end up spending a lot of money on fasteners, and this will then eat up your profits. You will then need to raise the prices of your goods to maintain profits, which will reduce your competitive edge. For this reason, one of the key issues you should focus on is how to do auditing of your fastener use in the facility to ensure that they are used in the most effective manner possible. Some of the things you will need to do to achieve this include:

  • Optimizing Your Fastener Supply Chain

    When you run a facility such as a manufacturing factory, you will always need to find a way to ensure that you always have the right fasteners for the job. This is something that many people take for granted, but which often turns out to be a lot trickier than most people think. The overall goal of using the best possible fasteners is to ensure that the cost of manufacturing is kept low, and that the quality of the products you make is also high. There are many things that will affect the quality of the fasteners you use, and one of these is the quality of the supply chain.

1-10 of 19

Page:
  1. 1
  2. 2