Industrial Fasteners

Choose a Category or Search Above

  • Mistakes You Should Avoid When Using Stainless Steel Fasteners

    The use of stainless steel fasteners is quite popular because of their excellent corrosion-resistant and recyclable properties. They offer resistance against any level of usage severity and have great load-bearing characteristics in both hot and cold weather. However, if these fasteners are not handled properly; it may bring damage to the entire setup. Here are few mistakes you certainly cannot afford to make when using stainless steel fasteners.

  • How You Can Save Money On Aircraft Nuts And Bolts

    There are various kinds of fasteners available for application in numerous industries and they differ in dimension, durability, robustness, pull-out strength, shear-capacity, corrosion-resistance and many other factors that go into manufacturing a certain type of fastener for particular equipment. Speaking of which, the aviation industry utilizes parts that meet the safety standards recommended by the relevant body, and in order to fit those parts firmly to tolerate a huge amount of stress, the fasteners such as aircraft nuts and bolts play the vital role.

  • Good Habits That Will Make Stainless Steel Fasteners Last Longer

    Stainless steel fasteners may be an economically apt option that offer outstanding anti-corrosion properties, but that doesn’t mean they are not going to corrode or cost you anything extra in the long run.  Improper habits employed by casual operators can sometimes break down a properly-maintained framework. You need to educate the employees with good habits that preserve long-lasting characteristics of the stainless steel fasteners.

  • What is Galvanic Corrosion?

    The scientific definition of galvanic corrosion describes it as an electrochemical process in which two different metals or alloys come in electrical contact with each other in the presence of an electrolyte under the conditions of a corrosive environment, which leads to relative corrosion of both the materials in contact.

    Rusting of iron is the most common example of galvanic corrosion, in which the core steel of the iron sheet is attacked and the protective coating of zinc is destroyed.  Zinc being less noble is susceptible to the galvanic attack and once fully exterminated; it can cause the base metal to corrode very quickly. On the other hand, tin being more noble than the core steel makes it harder to break, but when it does, the underlying steel suffers the worst.

  • Are You Constantly Experiencing Loose Screws?

    Repair services are less called for, if maintenance of any sort of equipment is done on a routine basis with a simply outlined procedural approach that keeps a check on small things such as loosening of screws and other fasteners that hold the structure firmly. Not only does it save cost on future repairs, but also ensure there is no long term damage taking place. So if you have been frequently experiencing loose screws in the recent past, you should know the actual reasons behind it!

  • Do You Need Fasteners For Mounting Solar Panels?

    Solar panels absorb the sun’s rays and use them to create a source of energy which leads to generation of heat and electricity. These can either be installed on the roof or in an open ground which receives direct sunlight. The most vital thing is the tilt of the panel, so that the surface can be exposed to maximum rays.

    Depending upon the configuration of mounting a solar panel, there are different types of fasteners required to firmly hold the structure in order to resist any structural bend under extreme conditions. Reliability and stability of the mounting fasteners cannot be comprised, especially when the setup in question is a solar panel.

  • Common Mistakes To Avoid When Picking A Fastener Supplier

    When you decide to run a large scale manufacturing or assembly line, you will need to figure out how to procure the fasteners you need for the job. A common mistake for many first time business owners in such a position is thinking that since fasteners such as Inconel hex head cap screws and Nitronic 50 hex nuts are all the same, they can get them from pretty much any vendor they come across. However, it’s important to note that it’s easy to make many mistakes when you are picking such a vendor. Some of the most common ones include:

  • Are You Doing Fastener Storage The Right Way?

    When you run an industry where you have to assemble items, the issue of fastener storage is one that you are likely to not pay much attention to. However, the truth is that if you are not keen, you may end up having a few problems with the operation, mainly due to the fact that the fasteners may not have been stored properly. If you are going to use such fasteners in the long run, it is therefore imperative that you do all you can to store them properly.

  • An Introduction To Tension Control Bolts

    tension control bolts

    In the construction industry, there are many different types of fasteners that are used for different applications. One of the most common of these is the tension control bolt. This is a popular type of bolt owing to the fact that it is usually designed for use in keeping steel frames together. If you are involved in the construction industry, making sure that you understand how to use them well will be critical in ensuring that all your projects are as successful as possible.

  • Fastener Tensile Strength Vs. Yield Strength: Which Is More Important?

    tensile vs. yield strength

    During the manufacture of electronics and other products, it’s usually necessary to incorporate the use of fasteners in the design process. It’s critical that you always try to get this right. Using fasteners such as aluminum hex tap bolts and titanium carriage bolts will only work for you if you get the technical issues right. To do this, you will need to gain a basic understanding of the mechanics behind fastener use.

    One of the important things to take note of is the difference between tensile strength and yield strength. It is important to know the difference between these two since it will help you figure out how to get the right fasteners for the job.

1-10 of 63

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7