concrete fasteners

Choose a Category or Search Above

  • Mistakes You Should Avoid When Using Stainless Steel Fasteners

    The use of stainless steel fasteners is quite popular because of their excellent corrosion-resistant and recyclable properties. They offer resistance against any level of usage severity and have great load-bearing characteristics in both hot and cold weather. However, if these fasteners are not handled properly; it may bring damage to the entire setup. Here are few mistakes you certainly cannot afford to make when using stainless steel fasteners.

  • Do You Need Fasteners For Mounting Solar Panels?

    Solar panels absorb the sun’s rays and use them to create a source of energy which leads to generation of heat and electricity. These can either be installed on the roof or in an open ground which receives direct sunlight. The most vital thing is the tilt of the panel, so that the surface can be exposed to maximum rays.

    Depending upon the configuration of mounting a solar panel, there are different types of fasteners required to firmly hold the structure in order to resist any structural bend under extreme conditions. Reliability and stability of the mounting fasteners cannot be comprised, especially when the setup in question is a solar panel.

  • The Most Common Fastener Coatings

    In order to get the most out of any fasteners, it is usually necessary to make sure that every aspect of the fastener is suited to the application you are going to use it for. For instance, if you are going to use stainless steel hex head cap screws for bridge construction, it would be important to make sure that the size and configuration of the screws are suited to holding up the weight of the bridge together with the vehicles or people who will be using it. In order to do this properly, a knowledge of the various things that affect the performance of the fasteners is critical.

  • Safety Features Of A Flyover Bridge

    Having a flyover bridge has many benefits. One of the most important of these is the fact that it makes it easier for pedestrians to cross a particular road with ease. This is very important particularly in very wide or very busy highways, where installing zebra crossings might not make sense, or might put the pedestrians at risk. In such cases, the use of such a bridge will make it easier for people to cross the bridge with ease.

    If you are designing one, one of the principal things you need to keep in mind is how safe it will be. Remember, most people will only use such a bridge if it looks safe. If it ends up causing accidents such as by collapsing, this could result in lawsuits against the city that is responsible for it, or the individual who was responsible for designing it in the first place. To avoid this, it’s important to keep in mind the features that such a bridge should have in order to make it as safe as possible. Some of the most important ones include:

  • Using Ground Screws For Your Fencing Project

    If you are interested in installing a fence around your property, one of the goals you might have is how to make sure that it lasts long. The types of fasteners you choose for the job will have a huge role in determining this. For instance, you could use nitronic 50 socket head cap screws to fasten sheet metal across the fence posts.

    Using high quality products would ensure that this installation lasts longer, and that you would not have to spend a lot of time and money on maintenance. It would also be wise to use other associated accessories such as aluminum flat washers to make sure the fasteners are as tight as possible.

  • Wall Mounting A TV: Common Mistakes You Need To Avoid

    Wall mounting a TV can be one of the best ways of getting the most out of your viewing experience and its role in fitting into your decor. This is particularly important when you are interested in getting a more modern, minimalist design theme for your living room. In such cases, you should consider mounting the TV on the wall. This way, you can reduce the amount of furniture you need to keep the TV upright.

    As is the case with many other projects of this kind, there are a number of things you ought to consider when installing a TV in this manner. Many of these are usually obvious, but many people tend to get them wrong for one reason or another. Some of them include:

  • Concrete Column Fastening: What Are Your Fastener Options?

    Most people usually assume that when installing columns in a home, you don’t need to fasten them in place. However, this is not always the case. Many times, you will need to use fasteners such as steel hex head cap screws and titanium hex nuts to hold the column in place, in addition to using the concrete bracings you might use for it as well. One of the difficulties you are likely to face when in such a position is how to figure out which fastening options you should use. In all such cases, you need to consider various technical issues for your fastener options, including:

  • Factors To Consider When Choosing Fasteners For Car Park Design

    Designing a car park is something that often needs to be well thought out in order to be effective. One of the challenges that many people normally face when in this position is how to ensure that they end up with the highest level of quality for the least amount of money. Of course, there is a lot that you need to consider. One of the things that you are likely to overlook is the quality of the fasteners you use in the process. It might not seem important, but it’s critical that you always try to get the right fasteners for any car park construction job.

  • Fastening Vibrating Equipment: The Challenges You Are Likely To Face

    vibration equipment and fasteners

    If there is one class of products that need proper fastening, it is vibrating equipment. The fact that they move around a lot means that you have to install them with high quality fasteners such as the nitronic 60 hex head cap screws and titanium hex tap bolts. If you are to have minimal problems with such equipment, you will need to be very critical of your decisions regarding not only the types of fasteners you get, but also how you use them. The only way to do this correctly is by understanding the challenges that normally face the installation of vibrating equipment. Some of the most common of these include:

  • What You Need To Know About Magnetism And Stainless Steel Fasteners

    magnetism and fasteners

    One of the major misconceptions about using 316 stainless steel hex tap bolts and 18-8 Stainless Steel hex lag bolts is the fact that most people think that they are not magnetic. This is because generally speaking, not all types of steel are considered magnetic. This can create a number of problems when you are thinking of using fasteners. In some settings, the effect of magnetism on the fasteners is an important consideration when choosing them.

1-10 of 41

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5