Mining Industry Fasteners

Choose a Category or Search Above

  • Mistakes You Should Avoid When Using Stainless Steel Fasteners

    The use of stainless steel fasteners is quite popular because of their excellent corrosion-resistant and recyclable properties. They offer resistance against any level of usage severity and have great load-bearing characteristics in both hot and cold weather. However, if these fasteners are not handled properly; it may bring damage to the entire setup. Here are few mistakes you certainly cannot afford to make when using stainless steel fasteners.

  • Simple Tricks To Reduce Fastener Wastage In A Manufacturing Plant

    reduce fastener wastage

    In the manufacturing industry, one of the things you have to keep an eye on is reducing the costs of doing any manufacturing. This often increases the competitiveness of the facility, and is therefore something that is definitely worth pursuing.

    Unfortunately, there are many issues that usually need to be sorted out when doing this, one of which is making sure that you minimize the loss attributable to fastener loss and damage. Remember that though fasteners such as Inconel center lock nuts and alloy 20 hex tap bolts might seem like minor parts of the manufacturing process, they can actually result in a major loss if they are not used properly.

  • What You Need To Know About Magnetism And Stainless Steel Fasteners

    magnetism and fasteners

    One of the major misconceptions about using 316 stainless steel hex tap bolts and 18-8 Stainless Steel hex lag bolts is the fact that most people think that they are not magnetic. This is because generally speaking, not all types of steel are considered magnetic. This can create a number of problems when you are thinking of using fasteners. In some settings, the effect of magnetism on the fasteners is an important consideration when choosing them.

  • How To Achieve Proper Alignment When Drilling A Screw Onto A Surface

    drilling a screw

    When you are installing wooden furniture in your home, one of the major concerns you will definitely have is how to make sure that the outcome is beautiful. An example of this is when you are fixing cabinets or installing new ones, and want to make sure that they will look appealing once done. One of the major determinants of this is how you use fasteners such as aluminum Phillips screws and alloy 20 carriage bolts for the job. There are a few tips that will always go a long way in making any DIY job look professionally done as far as fastener use is concerned. Some of these include:

  • The Applications Of Vacuum Treatment In Fastener Manufacturing

    vacuum treatment for fasteners

    When you are shopping for aluminum cap nuts or 316 Stainless steel hex head cap screws, one of the things you might come across is the issue of vacuum treatment. In essence, vacuum treatment is a form of treatment where the fasteners are heated in a vacuum to ensure that they attain a specific chemical or structural characteristic. The characteristic often depends on the type of metal involved, as well as the temperatures at which the metals have been heated.

    The use of a vacuum system for this application is a fairly recent technology that has been put in place to ensure that the performance of the fasteners is improved. It’s important that you understand how this work as the consumer, so that the next time you go shopping for fasteners you will have an easy time making decisions on what to get.

  • Simple Ways To Reduce The Risk Of Structural Bolt Failure

     

    structural bolt failure

    When using fasteners such as Nitronic 50 hex lab bolts or Monel 500 carriage bolts, a common issue you will often have to deal with is bolt and nut failure. This is defined as a situation where the fastener used becomes structurally unstable, which in turn means that you would need to get rid of it and replace it with another type of bolt.

  • What You Need To Know About Hydrogen Embrittlement And Fasteners

    fastener hydrogen embrittlement

    When you are interested in buying fasteners such as Inconel hex head cap screws or Monel 400 hex tap bolts, one of the most important things you would need to account for is the performance of the fasteners. This is important since it determines how long they will last before needing any replacement, and also how long the product you are fastening will last.

    It is always a prudent measure to ensure that you understand the different ways in which the fasteners can be damaged, so that you can get ones that will resist this. One of the categories of damage that you definitely need to be familiar with is hydrogen embrittlement.

  • The Role Of Heat Treatment In Fastener Use

    When you want to use fasteners such as Hastelloy C276 cap nuts, it is normally necessary to ensure that they are suitably prepared for the application they will be used for. The strategies you will use for such preparation depend on many things including the type of fastener you are using, what it’s made of and the environment you will be using it. However, it’s always apparent that making the necessary preparations will have an influence in increasing the longevity of the joint that you make using the fasteners, and will also go a long way in optimizing the overall quality of the item you are putting together.

  • Quality Practices You Should Implement When Using Fasteners

    Whenever you are interested in using fasteners for large or small scale applications, it’s always wise to ensure that you use the best you can get for that particular application. This basically means that you should incorporate quality practices in any decision making process you involve yourself in when in this position. This does a lot more than simply reducing the rate of failure of the fasteners you use. It will also have an influence on the overall quality of the product you are putting together, and may even make it more pleasant to use. When deciding on using fasteners such as an Inconel hex tap bolt or a monel 500 hex head cap screw, some of the quality practices you might need to keep in mind include:

  • How Galvanic Corrosion Occurs And How You Can Protect Your Fasteners From It

    If you run an industry where you have to use a large number of fasteners for any reason, it’s always important to pay attention to how you use them to reduce the chances of complications. Whether you are making products for industrial or retail use, a high incidence of fastener failure is something that can eventually erode the trust that clients have in your products. In the end, you might end up losing all your business.

    One of the specific issues you need to address is how to ensure that the fasteners you use will not corrode over time. There are many ways in which this can happen, but one of the most commonly seen is galvanic corrosion. This typically occurs when you use fasteners such as 316 stainless steel hex nuts without preparing them first.

1-10 of 29

Page:
  1. 1
  2. 2
  3. 3