Marine Fasteners

Choose a Category or Search Above

  • Mistakes You Should Avoid When Using Stainless Steel Fasteners

    The use of stainless steel fasteners is quite popular because of their excellent corrosion-resistant and recyclable properties. They offer resistance against any level of usage severity and have great load-bearing characteristics in both hot and cold weather. However, if these fasteners are not handled properly; it may bring damage to the entire setup. Here are few mistakes you certainly cannot afford to make when using stainless steel fasteners.

  • The Importance Of Proper Riveting In Ship Restoration

    The restoration of old ships is a fun process, though it can also be arduous at times. If you find yourself in a position where you need to restore one, it would be wise to ensure that you plan on how you will go about it. This is particularly so if you want to ensure that the finished product will have the same characteristics and looks as it would have in its heyday.

    To do this, you may need to use the ship building technologies that were used at the time the ship was manufactured, rather than the ones used today. For instance, in a place where you would use titanium hex head cap screws today, ship builders of old may have used an entirely different fastener. It’s important that you acquaint yourself with such issues before proceeding with the restoration.

  • Qualities Of Titanium That Make It An Excellent Fastener Material

    Titanium

    When you are out there shopping for fasteners, one of the things that you will have to deal with is how to figure out which material to get them in. These days, titanium carriage bolts and titanium hex lag bolts are the in thing in many industries. The reason for this is that since its development, titanium has turned out to be one of the most reliable metals for fastener use in many industries. Most people know of titanium owing to the fact that it’s very expensive, and this is why it’s not so common. However, there are many scenarios where using it makes a lot of sense. Some of the reasons that make it particularly appealing include:

  • Simple Tricks To Reduce Fastener Wastage In A Manufacturing Plant

    reduce fastener wastage

    In the manufacturing industry, one of the things you have to keep an eye on is reducing the costs of doing any manufacturing. This often increases the competitiveness of the facility, and is therefore something that is definitely worth pursuing.

    Unfortunately, there are many issues that usually need to be sorted out when doing this, one of which is making sure that you minimize the loss attributable to fastener loss and damage. Remember that though fasteners such as Inconel center lock nuts and alloy 20 hex tap bolts might seem like minor parts of the manufacturing process, they can actually result in a major loss if they are not used properly.

  • Why You Should Consider Plastic Fasteners For Marine Use

    When thinking of using fasteners in a marine setting, most people will opt for traditional fasteners such as Grade 5 steel carriage bolts or nitronic 50 hex lag bolts. This is because most of these are easily available, and have been the traditional marine-use fasteners for a long time. However, if you are thinking of getting more out of your boat, you might consider having it fastened using newer materials such as new age nylon.

    maine industry plastic fasteners

    Using plastic fasteners to join boat panels and parts might at first seem odd. The main problem that most people face is that plastic seems too soft to keep all the boat parts together. However, the truth is that numerous advances have been made in the manufacture of plastic fasteners, which makes them more reliable these days. Some of the reasons why you should definitely think about them for marine use include:

  • When Is The Best Time To Opt For Self-Locking Fasteners?

    self locking fasteners when to use

    When you are shopping around for fasteners, one of the types that you are likely to run into are the self-locking ones. These can be variants of the normal types of fasteners such as the Monel 500 carriage bolts or the Hastelloy C276 hex tap bolts. However, they have the distinctive characteristic of being self-locking, which means that they can’t be used for just any application. There are a number of scenarios where the use of such fasteners is particularly effective, as they offer superior performance compared to other types of fasteners. Examples of these scenarios include:

  • Effective Ways To Remove Stripped Screws

    removing stripped screws

    If you regularly work with hardware, one of the problems you are likely to run into at some point in time is finding that your screws become stripped. This can happen when you are putting them in place, as well as when you are getting them out as well. Working with stripped screws can be very frustrating, since the removal of the threads has the potential to make the work much harder to handle.

  • What You Need To Know About Magnetism And Stainless Steel Fasteners

    magnetism and fasteners

    One of the major misconceptions about using 316 stainless steel hex tap bolts and 18-8 Stainless Steel hex lag bolts is the fact that most people think that they are not magnetic. This is because generally speaking, not all types of steel are considered magnetic. This can create a number of problems when you are thinking of using fasteners. In some settings, the effect of magnetism on the fasteners is an important consideration when choosing them.

  • How To Achieve Proper Alignment When Drilling A Screw Onto A Surface

    drilling a screw

    When you are installing wooden furniture in your home, one of the major concerns you will definitely have is how to make sure that the outcome is beautiful. An example of this is when you are fixing cabinets or installing new ones, and want to make sure that they will look appealing once done. One of the major determinants of this is how you use fasteners such as aluminum Phillips screws and alloy 20 carriage bolts for the job. There are a few tips that will always go a long way in making any DIY job look professionally done as far as fastener use is concerned. Some of these include:

  • The Applications Of Vacuum Treatment In Fastener Manufacturing

    vacuum treatment for fasteners

    When you are shopping for aluminum cap nuts or 316 Stainless steel hex head cap screws, one of the things you might come across is the issue of vacuum treatment. In essence, vacuum treatment is a form of treatment where the fasteners are heated in a vacuum to ensure that they attain a specific chemical or structural characteristic. The characteristic often depends on the type of metal involved, as well as the temperatures at which the metals have been heated.

    The use of a vacuum system for this application is a fairly recent technology that has been put in place to ensure that the performance of the fasteners is improved. It’s important that you understand how this work as the consumer, so that the next time you go shopping for fasteners you will have an easy time making decisions on what to get.

1-10 of 48

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5