Industrial Fasteners

Choose a Category or Search Above

  • Mistakes You Should Avoid When Using Stainless Steel Fasteners

    The use of stainless steel fasteners is quite popular because of their excellent corrosion-resistant and recyclable properties. They offer resistance against any level of usage severity and have great load-bearing characteristics in both hot and cold weather. However, if these fasteners are not handled properly; it may bring damage to the entire setup. Here are few mistakes you certainly cannot afford to make when using stainless steel fasteners.

  • How You Can Save Money On Aircraft Nuts And Bolts

    There are various kinds of fasteners available for application in numerous industries and they differ in dimension, durability, robustness, pull-out strength, shear-capacity, corrosion-resistance and many other factors that go into manufacturing a certain type of fastener for particular equipment. Speaking of which, the aviation industry utilizes parts that meet the safety standards recommended by the relevant body, and in order to fit those parts firmly to tolerate a huge amount of stress, the fasteners such as aircraft nuts and bolts play the vital role.

  • Good Habits That Will Make Stainless Steel Fasteners Last Longer

    Stainless steel fasteners may be an economically apt option that offer outstanding anti-corrosion properties, but that doesn’t mean they are not going to corrode or cost you anything extra in the long run.  Improper habits employed by casual operators can sometimes break down a properly-maintained framework. You need to educate the employees with good habits that preserve long-lasting characteristics of the stainless steel fasteners.

  • What is Galvanic Corrosion?

    The scientific definition of galvanic corrosion describes it as an electrochemical process in which two different metals or alloys come in electrical contact with each other in the presence of an electrolyte under the conditions of a corrosive environment, which leads to relative corrosion of both the materials in contact.

    Rusting of iron is the most common example of galvanic corrosion, in which the core steel of the iron sheet is attacked and the protective coating of zinc is destroyed.  Zinc being less noble is susceptible to the galvanic attack and once fully exterminated; it can cause the base metal to corrode very quickly. On the other hand, tin being more noble than the core steel makes it harder to break, but when it does, the underlying steel suffers the worst.

  • Are You Constantly Experiencing Loose Screws?

    Repair services are less called for, if maintenance of any sort of equipment is done on a routine basis with a simply outlined procedural approach that keeps a check on small things such as loosening of screws and other fasteners that hold the structure firmly. Not only does it save cost on future repairs, but also ensure there is no long term damage taking place. So if you have been frequently experiencing loose screws in the recent past, you should know the actual reasons behind it!

  • Tips On Heat Treating Fasteners

    The heat treatment process employs cooling and heating operations applied on alloys or metals in the solid state of matter. Fasteners are subjected to application of heat in order to achieve desired alteration in rigidity, smoothness, malleability and material strength.  The microstructure of the metal parts is altered by the process of annealing to ease off the manufacturing operation.

    In this process, the three most common types of furnaces used are: rotary, batch and continuous mesh-belt. Such an operation involves huge investment of energy and cost. Hence, it’s sensible to keep a few points in mind when heat treating fasteners.

  • Do You Need Fasteners For Mounting Solar Panels?

    Solar panels absorb the sun’s rays and use them to create a source of energy which leads to generation of heat and electricity. These can either be installed on the roof or in an open ground which receives direct sunlight. The most vital thing is the tilt of the panel, so that the surface can be exposed to maximum rays.

    Depending upon the configuration of mounting a solar panel, there are different types of fasteners required to firmly hold the structure in order to resist any structural bend under extreme conditions. Reliability and stability of the mounting fasteners cannot be comprised, especially when the setup in question is a solar panel.

  • The Most Common Fastener Coatings

    In order to get the most out of any fasteners, it is usually necessary to make sure that every aspect of the fastener is suited to the application you are going to use it for. For instance, if you are going to use stainless steel hex head cap screws for bridge construction, it would be important to make sure that the size and configuration of the screws are suited to holding up the weight of the bridge together with the vehicles or people who will be using it. In order to do this properly, a knowledge of the various things that affect the performance of the fasteners is critical.

  • The Environmental Challenges Of Using Stainless Steel Fasteners

    When most people go out to buy fasteners, they usually get stainless steel hex head cap screws, stainless steel hex nuts and many other fasteners made out of this metal. One of the issues that most people have to contend with is the environmental impact of using stainless steel fasteners. This is mainly due to the fact that many people are now more conscious of the environment, and for this reason will try to do as much as they can to reduce their effect on it. The use of stainless steel products such as fasteners can have a negative influence on the environment, particularly if you don’t pay attention to how you go about acquiring and using them.

  • Tips On Using Fasteners For High Temperature Applications

    When you are interested in fastening a product that will be exposed to high temperatures, you often need to pay keen attention to the types of fasteners you will use. This is because this will affect the longevity of the product, as well as how long it’s going to last. In order to do this, you will need to understand how fasteners behave when exposed to high temperatures, and the features that will make them last much longer as well.

1-10 of 145

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 15