Distributor Fastener

Choose a Category or Search Above

  • Should You Consider Thread Repair For Your Fasteners?

    There are many industries in which you will need to use fasteners in large quantities. Typical examples of this include when you assemble equipment such as car engines and in the construction industry. In such cases, you need to be smart with how you work with your fasteners, since this will determine both the cost and ease with which you achieve your goals. There are many factors you often need to take into account to this end. One of these would be thinking about whether to repair your fastener threads or not.

  • Printed Circuit Boards: How To Identify The Best Fasteners For Installation

    With the rise in the use of many types of electronics in this day and age, the printed circuit board is one of the most commonly used components in most industries. This type of device is used to control nearly all devices, especially consumer electronics. If you are a manufacturer involved in the creation of such items, it therefore makes sense for you to ensure that the fastening of printed circuit boards is done correctly.

    There are a number of reasons why this is so. For one, the fact that such boards are central to the functioning of any electronics means that they need to be designed well. When there are any flaws in design, it means that the circuit boards are likely not to work well, and that the customer is less likely to be satisfied. Given the fact that there is a lot of competition in this industry, this will definitely not bode well for any manufacturer. Using the wrong aluminum Phillips truss screws or Inconel hex head nuts should be avoided. Some of the ways of identifying the best fasteners for printed circuit board installation include:

  • Understanding Bulge Control Rivets

    There are many instances where one might need to use blind rivets for fastening. In the past, there was a limited number of rivet types that one could use, which means that the decision on which ones to get was fairly easy to make. However, the advancements in manufacturing of such rivets means that today, you have more options regarding the same.

  • How To Figure Out The Size Of Screw To Use

    When you regularly use fasteners such as screws, it is important for you to be sure about the technical details regarding them. One of the common mistakes that people make when choosing screws is not considering the issue of size. However, it’s vital that you always try to pick the right screw size since this will determine many things including the quality of the product that you make.

    In many cases, this will also influence the safety and longevity of the product you end up with. When doing manufacturing on a large scale, fastener size may also influence the final cost of the process. When you use fasteners that are needlessly large for a particular product, it will turn out to be more expensive than it should be. This may translate to higher product costs or less profit for you.

  • The Differences Between Machine Screws And Other Types Of Screws

    When doing any type of design, it’s usually necessary to decide on which types of fasteners you will use for the job. It’s important that you get this right from the word go, since it will determine the quality of the outcome. There are many different types of fasteners out there, so it’s easy for you to choose the wrong type if you are not very keen on what you are doing. The key to getting it right is by first understanding the reasons why you need the fasteners for a particular job, and then getting ones that are meant to fulfill this role.

  • Tips On How To Achieved Concealed Screws During Fastening

    When using fasteners such as the aluminum carriage bolts or Hastelloy carriage bolts, one of the common issues that people pay attention to is the aesthetic effect of the outcome. These days, most products need not only work well but also have to look pleasing if they are to be popular. Even if you are trying to do home repairs, you are likely to be more comfortable with the repairs if they are not only practical but also aesthetically pleasing.

  • 3 Fastener Tightening Specifications You Need To Understand

    Whenever you need to use fasteners such as Inconel hex tap bolts and nitronic 60 hex lag bolts, it is critical that you always try to get it right. This is especially so if you intend to manufacture products that are likely to be used either by regular or corporate consumers. In such cases, you will find that most of them will insist on using products that meet a certain minimum when it comes to the quality of construction.

  • The Rational Use Of Custom Made Fasteners In Electronics Design

    In any industry, using anything custom made is usually considered to be a sign of prestige and exclusivity. However, it’s not always a wise decision to decide to use custom made items in all instances. For instance, if you run a manufacturing plant, you might need to invest in fasteners such as screws and bolts. This is especially so when it comes to the manufacturing of electrical goods. Some of the things that you might be looking out for when deciding to use custom made fasteners include achieving a certain look as well as ensuring that the security of the appliance or product is maintained.

  • An Introduction To Tension Control Bolts

    tension control bolts

    In the construction industry, there are many different types of fasteners that are used for different applications. One of the most common of these is the tension control bolt. This is a popular type of bolt owing to the fact that it is usually designed for use in keeping steel frames together. If you are involved in the construction industry, making sure that you understand how to use them well will be critical in ensuring that all your projects are as successful as possible.

  • Fastener Tensile Strength Vs. Yield Strength: Which Is More Important?

    tensile vs. yield strength

    During the manufacture of electronics and other products, it’s usually necessary to incorporate the use of fasteners in the design process. It’s critical that you always try to get this right. Using fasteners such as aluminum hex tap bolts and titanium carriage bolts will only work for you if you get the technical issues right. To do this, you will need to gain a basic understanding of the mechanics behind fastener use.

    One of the important things to take note of is the difference between tensile strength and yield strength. It is important to know the difference between these two since it will help you figure out how to get the right fasteners for the job.

91-100 of 302